Ask Experts Questions for FREE Help !
Ask
    1smartcookie's Avatar
    1smartcookie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 13, 2009, 06:58 PM
    Outside Disconnect
    What is the working area for an outside disconnect?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Sep 14, 2009, 02:29 AM
    30 inches wide in front of the equipment, and does not need to be centered, and 36 inch out in front from cover.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

200 amp disconnect [ 1 Answers ]

Will a 200 amp single phase disconnect have two 100 amp fuses or two 200 amp fuses?

Disconnect [ 9 Answers ]

Hello: For once, I don't want to talk about the issues that disconnect us. We KNOW what THOSE are. I want to talk about the disconnect itself. Why is it happening? I see it from ALL sides - the willingness to lie about the other side and/or the willingness to lie about YOUR side. Before...

Spa disconnect [ 1 Answers ]

Does the spa box count as the disconnect or does there need to be one somewhere else? I am building a 12'x12' gazebo and the spa box will be on the outside. The wiring is going to come up through the concrete in steel conduit. To add a disconnect somewhere else would put it somewhere in the...

Need help with 200 amp disconnect [ 1 Answers ]

I am in the process of re-wiring my house. My load center used to be located on the outside of my house. I have now moved the load center (200 amp sq d qo panal) to the inside, and am looking to place a 200 amp disconnect next to the meter pan. I was told I needed to get 2 awg 3 cond with ground to...

Hot Tub Disconnect [ 4 Answers ]

From reading past questions and responses, I got a fairly clear idea about how to wire the GFI panel between the distribution panel and hot tub. Thanks for the references that people posted! There is still one requirement, however, that still puzzles me. The NEC calls for a disconnect to be...

View more questions Search