Ask Experts Questions for FREE Help !
Ask
    iobub5's Avatar
    iobub5 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 9, 2009, 01:53 PM
    200 amp disconnect
    Will a 200 amp single phase disconnect have two 100 amp fuses or two 200 amp fuses?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Sep 9, 2009, 03:06 PM
    Depends on if it is fused or non-fused, or if it is a breaker. ;)

    A 200A fused disconnect would typically have 200A fuses, unless the specs called for smaller ones.

    I see what you are implying and NO, you do not add up the rating.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Disconnect [ 9 Answers ]

Hello: For once, I don't want to talk about the issues that disconnect us. We KNOW what THOSE are. I want to talk about the disconnect itself. Why is it happening? I see it from ALL sides - the willingness to lie about the other side and/or the willingness to lie about YOUR side. Before...

Spa disconnect [ 1 Answers ]

Does the spa box count as the disconnect or does there need to be one somewhere else? I am building a 12'x12' gazebo and the spa box will be on the outside. The wiring is going to come up through the concrete in steel conduit. To add a disconnect somewhere else would put it somewhere in the...

Locking disconnect [ 1 Answers ]

What is locking diconnect with respect to starters.

Need help with 200 amp disconnect [ 1 Answers ]

I am in the process of re-wiring my house. My load center used to be located on the outside of my house. I have now moved the load center (200 amp sq d qo panal) to the inside, and am looking to place a 200 amp disconnect next to the meter pan. I was told I needed to get 2 awg 3 cond with ground to...

Hot Tub Disconnect [ 4 Answers ]

From reading past questions and responses, I got a fairly clear idea about how to wire the GFI panel between the distribution panel and hot tub. Thanks for the references that people posted! There is still one requirement, however, that still puzzles me. The NEC calls for a disconnect to be...


View more questions Search