Ask Experts Questions for FREE Help !
Ask
    Poppy01's Avatar
    Poppy01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 12, 2009, 10:37 AM
    14.5 HP MTD mower won't start
    My 14.5 hp MTD riding mower won't start. Turn the key and nothing happens.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Sep 12, 2009, 10:49 AM

    Hi,
    The ignition switch connects through the brake and blade switches to the solenoid's trigger. Somewhere in that circuit assuming a good battery.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mower will not start [ 3 Answers ]

I have a Troy Bilt push mower that will not start. Gas is good. Spark is good. When pulling on the rope, I'll get it to pop a little, but that's it. :)

Lawn mower won't start , changed Plug , but Still won't Start [ 2 Answers ]

My lawn mower won't Start , I tried Changing the Plug , But still won't Start

17.5 hp mower will not start [ 2 Answers ]

Hello I have a 17.5 hp stanley hydro-matic lawnmower my son went to get it out of storage and melted the starter selinoid replaced it and it will not turn over it will start if you jump the selinoid but it will only run for a few seconds so I replaced ignition switch and still the same thing...

Mower will not start [ 3 Answers ]

The lawnmower starts runs a minute then stalls out what could be wrong

Mower won't start. [ 9 Answers ]

All, I was working on the wiring on my mower, because a white wire was disconnected. It smoked from the flywheel area. I thought it was the coil, replaced that. It still doesn't start. It will turn over continually no problem. Just doesn't fire up. Could it be a switch, wiring, any ideas? ...

View more questions Search