 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi, Because most engines have an ACR, the spec is not given. Usually a healthy engine will have 120 psi. The manual is here: http://www.asberry.net/files/TP-2450-B.pdf Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We have a shut off valve with a slow leak, about a teaspoonful every 10 hours. I want to replace the valve but the copper pipe to which it's attached is too short not allowing me to cut off the old compression sleeve. It's to my understanding that I may use the old compression nut and...
I just fixed my old dishwasher line and I had to cut out a leak. I had enough copper tubing to just reroute the remaining tubing into the valve stop. However, it is an older house and the outside diameter of the tubing was a bit wider than what we use now. I got the nut on as far as I could and...
I have a 2.4L twin overhead cam, the engine does not start, I did a compression test and they were as follows, from battery 156, 0, 165, 175... and It seems that every time I crank the engine I have oil splashing or such at the back of my engine bay... Any help or tips would be great thanks.
Unsure if this is the correct place for this question, but better here than nowhere. I have a Panasonic NV-GS11EB Digital Video Camera. This used 1 hour (standard use) mini cassettes. I have one such cassette with around 45 minutes of film. When I download this it creates a file anywhere...
View more questions Search
|
