Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Old AC condenser fan motor - which wires are which?
[ 5 Answers ]
I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...
Different Color/ Extra wires on new Compressor fan motor
[ 1 Answers ]
My Compressor fan motor stopped working last night. I noticed it when it was making a loud humming and buzzing noise. I gave it a few spins with a stick and it started spinning on its own but same problem when I woke up this morning. I purchased a new motor from Graingers today but the wiring is...
GE motor wires aren't labeled
[ 20 Answers ]
I have an old GE motor I pulled off a planer and want to use on a jointer, but need to switch directions. There is a barely legible wiring diagram on the back side of a cover, but the wires aren't numbered and the current wiring doesn't match up with the diagram. There are 9 wires and I...
1.5 harness need to run what wires for 1.6 motor
[ 1 Answers ]
I'm having probs because I had the d15 motor on my honda civic and now I got a d16a6 motor but I don't havethe harness to be able to run the mpfi I have the dizzy but I don't know what wires to run to activate this with the stock 1.5 harness please help... thanx
3 wires + 2 wires POOL MOTOR
[ 2 Answers ]
I need help connecting a motor for my pool. The motor has 3 wires coming out of it. 1 white, 1 black, 1 black with a white stripe. A continuity test on the 2 blacks says they are wired together somewhere. I have a power cable coming out of the ground. 1 white + 1 black cables inside. ... View more questions Search
|