Ask Experts Questions for FREE Help !
Ask
    jculek's Avatar
    jculek Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2009, 06:51 PM
    Oiled rubbed brass
    What's the best way to clean oiled rubbed brass fixtures
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Sep 4, 2009, 07:57 PM

    Open the links below it might help, Thanks.

    John

    http://www.alwaysbrilliant.com/aa/as...oXPRigg1Lvg%3d

    How to Clean Oil-Rubbed Bronze Fixtures - DIY Chatroom - Home Improvement Site
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Sep 5, 2009, 03:45 AM
    Step 1:
    Dampen a cloth in cool water and wipe any spots or dirt off your oil-rubbed bronze fixtures.
    Step 2:
    Dry the fixtures right away with a clean cloth; this prevents the development of new water spots.
    Step 3:
    Apply a scratch-sealing furniture wax, like Old English Scratch Cover, to any scratches, then wipe away excess. Make sure the wax you use is a dark tone that matches the color of your fixtures.
    Step 4:
    Spray a sealing wax, such as Flitz Shower Wax, on to your oil-rubbed bronze fixtures, then buff with a clean cloth, to protect against hard water stains. Goodluck, Tom
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    Sep 5, 2009, 07:23 AM

    Tom Thanks for backing me up that's exactly the same as my link #2 says in post #2, Thanks.

    Regards,
    John
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #5

    Sep 5, 2009, 07:49 AM
    Yeah John,
    I noticed that after I clicked on your link. But the post was already made so I let ride.
    I wondered if you'd pick up on that. Regards, Tom
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #6

    Sep 5, 2009, 07:51 AM

    No problem it is great to have you, Thanks.

    Regards,
    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Brass pex fittings [ 1 Answers ]

Can you reuse brass pex fittings again if the crimp doesn't take? If so , How do you get the crimp off? Thanks beth

Brass to PVC [ 7 Answers ]

Should teflon tape be used when connecting brass to PVC? What about plumber's putty? Just dry?

Brass knuckles [ 4 Answers ]

Are brass knuckles a felony?

Laquered Brass [ 10 Answers ]

Do any of you good people out there know how to remove the laquer coat that is put on Brass? It is pitted and would like to remove all laquer & polish brass. Thank you!

Protecting Brass [ 5 Answers ]

Any one have any suggestions for preventing brass kick plate on my front door from tarnishing? I considered clear laquer but need any alternatives.

View more questions Search