Ask Experts Questions for FREE Help !
Ask
    JC Camper's Avatar
    JC Camper Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2006, 11:43 AM
    Kenmore Elite Won't Agitate
    My top loader still spins but won't agitate. The machine emits a loud clack at the same tempo of the agitator changing directions.

    If this sounds like the transmission, what is involved in replacing it?

    Model 110.22932100

    Thanks
    RichardBondMan's Avatar
    RichardBondMan Posts: 832, Reputation: 66
    Senior Member
    		  
    #2

    Oct 26, 2006, 05:28 PM
    Sounds like a new machine is needed, cost of a transmission installed by say a Sears tech would be more than a new machine. You didn't say how old the washer was, life expectancy is about 6 yrs agerage.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite washer won't spin or agitate [ 11 Answers ]

I have a 5 year olf Kenmore elite washer that does not spin/agitate or pump water. Took the shell off, pump off, motor off. I left the motor connected to the wiring, tried to spin/agitate, but get no motion on motor, just a buzzing noise. Seems like the motor is bad? Is there any way to test this,...

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Help kenmore elite fills and then... [ 1 Answers ]

I have a kenmore elite washer,about 3-5 yrs old,it will fill with water and then it wount do anything,but u can hear the timer click

Kenmore Elite Dishwasher will not Agitate [ 1 Answers ]

I Just ran the dishwasher with the door open (wife not home to see... ) There is water coming out the bottom agitator and it is spinning slowly. The middle agitator has water coming out but it not spinning. THere is no water coming out the top agitator at all. Where to start?.

Kenmore Elite Dryer [ 3 Answers ]

From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...

View more questions Search