Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Light switch issue, Light stays on!
[ 8 Answers ]
Im having a problem with a light switch... the light stays on regardless of the position of the switch. I have swaped the switch out with a new one and still have the same problem. The switch controls to recessed lights over a fireplace. In the box on the wall there are several wires: 2 white...
Low coolant sensor light on
[ 4 Answers ]
I recently installed a radiator on a 1995 chevy monte carlo 6 cylinder 3.1 engine, however I am not sure if I installed it correctly, my low coolant sensor light is always on, but the coolant lever is full. Also my temperature gage is not moving all the way to the middle it seems that my vehicle...
New light stays on
[ 4 Answers ]
I just replaced an overhead light in a mobile home bathroom. The old light worked, but was VERY ugly. It has a dual switch and now will not go off. I wired it correctly, black to black, white to white and ground to ground. Neither switch works the light now. Help
Bad Coolant Sensor warning light
[ 5 Answers ]
I have a 1994 Jeep Grand Cherokee Limited. It has a new V.I.C in it that constantly says the coolant sensor is bad. I have replaced the coolant sensor. Now what do I do? Please help -- Ace
Coolant warning light 2001 Taurus
[ 2 Answers ]
It comes on but it has the correct amount of coolant. I have checked it both when cold and after running awhile. Temperature gauge indicates temperature is normal. If I stop and turn off ignition the light goes off. I am assuming it is a sensor that is going bad. Any suggestions? View more questions Search
|