Ask Experts Questions for FREE Help !
Ask
    Donillac's Avatar
    Donillac Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 21, 2009, 11:47 AM
    Brigs And Straton 15.5 Mastercraft Lawnmower
    Problem with this lawnmower, clutch pedal will not come out after engaged, can't even pull it back, any suggestions as to what the cause of this is, would it be a rod off or something like that, thanks,
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Aug 21, 2009, 12:46 PM

    Hi,
    I used to sell this brand of mower, but how about a model number so I know which one we are talking about.
    Peace,
    Clarke
    Donillac's Avatar
    Donillac Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 21, 2009, 02:18 PM

    It's a Mastercraft Special edition gold series, Model 28H707,
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Aug 22, 2009, 07:16 AM

    Hi,
    That is the engine model number, which Briggs says is not valid. The rest of the numbers with that number could help. Is the machine hydro or transmatic? What size deck (nuber of blades?)
    Many diffferent drive versions have existed over the years with the variable speed pulley in four locations and different linkages on the transmatic with similar variations on the hydro.
    I can get drawings, but need to know more info to look at correct year.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Brigs & Strattan Intek 17.5 HP - Valves [ 5 Answers ]

The mower seems to have experieinced the problem that others have commented on where the engine seems to have a starter/battery problem where it doesn't turn over or turns over sluggishly. The problem deteriorated from this occiasional reluctance in start to where it would start and run poorly...

Mastercraft snowblower not starts after transported [ 33 Answers ]

Happy New Year everybody! I just bought a second hand mastercraft snowblower, it worked all fine when I tested it with the seller. Unfortunately, I transported the snowblower by put it side sit in my SUV rather than upritht. After arrived home, I noticed all oil were leaked out, I just added...

Mastercraft lawntractor woes [ 1 Answers ]

Hello I have a 15.5 hp mastercraft lawn tractor I just took it out of storage run it awhile and started to drive (after fresh gas etc) it has a hydrostatic transmission it worked fine for 10 minutes then started to labor hard as I push forward or reverse on the speed stick it forces back on it (now...

18 hp Brigs & Straton Mower stalls. [ 3 Answers ]

18 hp Brigs & Stratton, Mower stalls.

Brigs and stratton vanguard engine 18 hp [ 1 Answers ]

My engine froze up, ran out for oil.got it Running again but it stopped abruptly.now it will not start .it turns over easily.pulled the plug and there is no compressicon.you would think that if ibroke sonthing in the engine,it wouldn't turn over. Any ideas. ...


View more questions Search