Ask Experts Questions for FREE Help !
Ask
    jimnc0454's Avatar
    jimnc0454 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2009, 10:46 AM
    14.5 OHV Briggs & Stratton Starter Issue
    I have a Yard Machine by MTD with a 14.5 B&S OHV. The mower was parked the beginning of last summer and I got it this past weekend. I have replaced the battery and have tried to crank it. The starter engages but will only turn the motor about 1/4 turn then quits. The solenoid clicks but nothing happens. I have loosened the starter and it spins. Also, I have taken out the plug and I can manually turn the motor so I do not think it would be anything internal. Does this sound like a starter problem? Thanks for any help you can give. :confused:
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 18, 2009, 12:53 PM

    Hi,
    First check your valve adjustment. The YouTube video should help (also, be sure engine is tight to frame for good ground.)
    YouTube - Lawn Mower Repair Valve Adjustment
    Peace,
    Clarke
    jimnc0454's Avatar
    jimnc0454 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Aug 18, 2009, 05:14 PM

    Thanks. It did help with adjusting the valves. Now the starter just sits and spins and the gear won't engage. Any ideas?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Aug 18, 2009, 06:59 PM

    Hi,
    Check battery first; hooked up backwards.
    Check pinion next; stipped or jammed down.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I can't pull the starter cord on my 10hp Briggs and Stratton Engine [ 6 Answers ]

I recently purchased a two year old 10 hp Troy Built wood chipper. I've used it for about 4-5 hours and recently had to add a little oil. I added the correct type as per the manufacturers instructions. It started up just fine and after 15 minutes or so I shut it off to empty the bag. Once the...

Briggs & Stratton 14.5 HOV bad starter? [ 7 Answers ]

I turn the key and the starter just spins, won't engage. Any suggestions on how to change it out and where to get another? Thanks, Mike

Briggs & Stratton Starter [ 1 Answers ]

My starter gear was shredded so we took the starter off and replaced the gear and put the starter back in. But when we hooked everything back up it doesn't even try to turn over. Now when we touch the starter relay to the starter it makes a clicking noise but that's it PLEASE HELP

Starter Rewind repair Briggs and Stratton [ 2 Answers ]

I have a Briggs and Stratton 3.75 Spirit motor Model 98902 Type 0131 with a broken recoil spring. I can rewind the cord by hand and still start the motor. However after a year and a half of that I figure it's time to fix this! I am mechanically sound but wanted to know if there is anything I...

View more questions Search