 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Design of submersible pump for sprinkling system
I want to design submersible pump for a borewell of 200m depth to water an area of 3000sq m with sprinkling system by incorporating 750 brass sprinklers and 6000 m gi pipeline of 50 mm dia.I particularly want to calculate head required for submersible pump so that water should reach to the last sprinkler with a working pressure of 150 kpa
|
||||
Check out some similar questions!
A friend asked me to hook up his water pump. He has the red black yellow and green wires running to the house, which he wants hooked up to the box. This is not right is it. I thought that power came from main box to a control box and these wires hooked to control box from pump?
I have an in ground sprinkling system that when I started it up this spring all seems normal on the EPS -SI controller. When I try and manually start the system the watering timer starts but NO water flows to the heads? Can anyone help with what the problem might be? Thanks
Hi, I asked the submersible pump question a while ago and speedball1 helped me a lot. I have additional question now. I have located the well. Can you tell me the steps to pull the pump out? Is it doable for an layman like me? I am pretty comfortable to explorer things but would like to...
I Have A Underground Sprinkling System That Has Two Zones. When I Put It Into Service This Year The Valves Turn On And Off Several Times During A Cycle. I Am On A Well System... have Plenty Of Water For All My In Home Pluming... do I Have Too much Pressure?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
