Ask Experts Questions for FREE Help !
Ask
    walworthd's Avatar
    walworthd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 12, 2006, 04:54 AM
    Sprinkling System Valve Problem
    I Have A Underground Sprinkling System That Has Two Zones. When I Put It Into Service This Year The Valves Turn On And Off Several Times During A Cycle. I Am On A Well System... have Plenty Of Water For All My In Home Pluming... do I Have Too much Pressure?
    shunned's Avatar
    shunned Posts: 268, Reputation: 20
    Full Member
    		  
    #2

    Jun 12, 2006, 05:38 PM
    Is the control in test mode? How is the time set for each zone?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Solenoid valve in refrigeration system [ 6 Answers ]

HI I have a question about Refrigration system that has two evaporator in one line, and each one has solenoid valae. What I want to know, why each one has solenoid valve, what is the purpose of that?

Zone valve problem [ 5 Answers ]

Zone valve for upstairs will not open. Already replaced thermostat. The only time I have heat upstairs is when the valve in manually opened and the downstairs heat kicks on. Any help or advice would be great! Thank you.

Replaced Shower valve problem [ 2 Answers ]

This SHOULD have been simple... I replaced HOT and COLD valves and the DIVERTER on 2 showers. They were old and needed to go. Great care was taken to match and get the proper replacements. The COLD on each shower works well. The HOT leaks out the center post a bit in each shower. The...

Gas valve pressure problem [ 1 Answers ]

I had an old Coleman Evcon furnace, the problem is when the flame came out doesn't come strong because the fleame stay right at the nozzle of valve pipe,

Diverter valve problem [ 1 Answers ]

Hi All, Had a problem with the diverter valve knurled end being worn, so I changed the whole valve(Danco replacement for Sayco). With the new valve, I have low pressure & also when putting water towards the shower head, it still comes out the lower spicket. How does that happen. Thanks in...

View more questions Search