Ask Experts Questions for FREE Help !
Ask
    keri64's Avatar
    keri64 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2008, 06:37 PM
    Kenmore ultrawash quick rinse blinking
    I have a 665.15784300 ultrawash dishwasher that won't run. The quick rinse button keeps flashing. The only thing that stops it is the high temp scrub button. Then it flashes back and forth between washing status and the quick rinse again. I have tried the air dry and hi temp scrub reset theory, but nothing happens. Any new ideas?
    meagank's Avatar
    meagank Posts: 67, Reputation: 3
    Junior Member
    		  
    #2

    Aug 23, 2008, 05:03 PM
    It sounds like your control apnal is gooing out and you will need a new one and all thoes nuumber you have up there do not mean anything for your dishwasher if you were trying to post the model or seral number theses can be located on the dishwasher if you opnd the door look straight ahead around the frame of the dish wahser you will see a little sticker that will say mod or model and ser or serial number if not there lolok on the insdide frame edges or aroudn the frame of the dishwahser if not there in any of thoes plases then the sticker has either been taken off or waren off
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher Model 665158240000 quick rinse flashing [ 23 Answers ]

Dishwasher quick rinse keeps blinking what does this mean? Can't turn it off.:confused:

Whirlpool dishwasher only runs quick rinse cycle [ 2 Answers ]

My Whirlpool dishwasher only runs the quick rinse cycle no matter which button is pressed. I have changed the electronics board and tried two different user interface boards. Any ideas? Or does anyone know where I can get a schematic for the interface board? Thanks, Tom

View more questions Search