Ask Experts Questions for FREE Help !
Ask
    jobob77's Avatar
    jobob77 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 23, 2006, 09:20 PM
    Kenmore catalyst dryer e1 error
    Have a Kenmore catalyst dryer. LCD shows e1 code and shuts off. Have to keep restarting to get it to dry. Anyone know what e1 is? Seems like a thermistor or sensor/over heat problem, but exact error code definition would be a great start.

    Jim
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
    		  
    #2

    Oct 26, 2006, 07:49 PM
    Im not sure about the code, but I do think you are on the right path.

    Check udner the dryer drum where the blower is at, for lint buid up. Also you can always check the resistance of the thermistor to see if its shorted or open while you are down there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Catalyst Washing Machine doesn't spin [ 32 Answers ]

I'm not sure if I have the correct model number. Nothing on back of washer. Under lid: SM 9710768-C. This is a Kenmore Elite Catalyst heavy duty, top load, king size capacity, ultra quiet pak, 3 speed motor with 6 speed combinations washing machine. I've tried both spin speeds, but neither work....

Kenmore elite catalyst washer not spinning [ 1 Answers ]

Model number 11020072991 Ok, here's where I'm at. I believe it's the drive coupler? I've disconnected the control panel and fliped it back. I remove the brass colored springs holding on the cover and removed the cover after disconnecting the clamps and hoses needed. Now, I'm stuck and don't...

Whirlpool Gold Catalyst washer error message [ 6 Answers ]

Whirlpool Gold Catalyst washer stops running and displays an error code of F3 or F4.

Kenmore Elite Catalyst Washer OL err Code [ 1 Answers ]

I have a Kenmore Elite Catalyst Washer that is reading the error code OL. I do not have model number. I bought the washer and dryer from a used vendor I have looked everywhere for the model #, I guess they might have scratched it off? If anyone has an error code list of this washer...

View more questions Search