Ask Experts Questions for FREE Help !
Ask
    warthog19's Avatar
    warthog19 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 13, 2009, 05:12 AM
    Controlling a Evap Cooler
    Hey Guys,
    I was just wanting to know I have a brivis evap cooler and I'm putting a Smart Temp "elegance" controller in to control my gas ducted heating, however I just wanted to know how to control my evap cooling. Obviously I could switch relay to put 240v to the pump and fan to bring them on but on the brivis controller its got a wheel that changes the speed of the fan a bit like a VSD (im sure you know the controllers I'm talking about) just wondering if its possible to control the fan through the contacts of a relay and still have lo, med and hi settings.
    Any info would heap.
    Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 13, 2009, 12:13 PM
    Read under installer adjustable parameters. How you actually hook it up will be up to you or a knowledgeable HVAC person.

    http://www.smart-temp.com.au/files/B...e_Brochure.pdf
    warthog19's Avatar
    warthog19 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 14, 2009, 05:58 AM

    hvac1000 thanks for the reply however it is not the setting up of the controller that I'm having problems with it's the actual hooking up like you said, I just want to know whether I can somehow use the figure 8 cable that's going to the old evap cooling thermostat or do I have to run cables and use replays to bring to the fan and pump on
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Aug 14, 2009, 07:25 AM
    I am sure you can reuse the cable but I am not familiar with the wiring that is why I referred you to a professional in your area by saying.

    How you actually hook it up will be up to you or a knowledgeable HVAC person.

    If I do not know how to hook up what you want to do I cannot tell you. Sorry
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Evap sys leak test [ 10 Answers ]

I have a 1999 toyota camry 4-2164 2.2l dohc .Went to mec he did evap sys leak test.Inject smoke into evap sys ck for leaks. I NEED EVAP SOLINOIND AND CANISTER 391.51 LABOR TO INSTALL PARTS 195.00 INJECT SMOKE 75.00 diagnose codes fr com 59.99 Did I pay too much

Air Cooler or Swamp Cooler? [ 4 Answers ]

Hello, I live in New Jersey... we have a/c wall units throughout the house. The back part of our living room does not receive enough a/c from the wall unit (there is a bend in the room) and there is no where to install another unit in the back part of the living room. We have only sliding...

EVAP Pressure Sensor? [ 1 Answers ]

Where is the evaporative pressure sensor on my 97 Mustang? Help!

99 Saturn SL2 EVAP system [ 2 Answers ]

Where is the EVAP system located on a 99 Saturn SL2? Where can I finnd it? And What does it look like? Thanks, John

Ac evap freezes over [ 6 Answers ]

My ac unit is a coleman eletric in a 78 model mobile home what need to know is what I need to fix it the unit won't shut off so the evaporator is freezing I tried turning it off at thermostat but it win't turn off is it the thermostat

View more questions Search