Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Best way to cap a copper water line: compression fitting or copper cap?
[ 29 Answers ]
Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...
Radius of chamber
[ 1 Answers ]
At an amusement park there is a ride in which cylindrically shaped chambers spin around a central axis. People sit in seats facing the axis, their backs against the outer wall. At one instant the outer wall moves at a speed of 3.30 m/s, and an 80.3-kg person feels a 517-N force pressing against his...
Air Chamber Plumbing Pipe
[ 8 Answers ]
We have had Water hammer happening at our house. While remodeling our bathroom, we discovered that the previous owners had drilled a hole in the plumbing air chamber pipe to run electrical wire to a new light they had installed!:eek: We have removed the electrical wire from the pipe. So our... View more questions Search
|