Ask Experts Questions for FREE Help !
Ask
    arpilot's Avatar
    arpilot Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 8, 2009, 12:21 AM
    How to program a garage door to my vehicle
    I have a new home and am having trouble programming the garage door opener into my vehicle. The vehicle is a 2004 Chevy Tahoe, and the garage door is a Lift Master 1/2 horse power, if that is any help.

    I've followed the owners manual to a "T" with absolutley no avail. Thanks a head of time. Hope you can help as NASA is my next contact, maybe they could tell me how to program it.

    David
    450donn's Avatar
    450donn Posts: 1,821, Reputation: 239
    Ultra Member
    		  
    #2

    Aug 8, 2009, 07:37 AM

    Being an X employee I can tell you that there are specific instructions for the Lift master operators. They use a rolling code. You need to contact a Wayne Dalton retailer and he should be able to get you the proper instructions.
    arpilot's Avatar
    arpilot Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 8, 2009, 11:20 PM

    Ok, is Wayne Dalton another brand?
    450donn's Avatar
    450donn Posts: 1,821, Reputation: 239
    Ultra Member
    		  
    #4

    Aug 9, 2009, 12:19 PM

    Liftmaster is a brand of garage door openers manufactured/supplied by Wayne Dalton Corp. Look in the phone book under garage doors and find a dealer. Or go to Home Depot and see if they have the proper information.
    You might also try their web site to see if they have the information there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Garage Door Opener Will Not Close Door. Light Is Flashing. [ 16 Answers ]

Garage door opener does not close door. Light is flashing and there no obstructions in sensors. Chester

How to program a garage door remote control [ 2 Answers ]

My garage door is a Chamberlain with board control model 41A3071. According to a chart, the remote model should be 61LM. The 61LM model has 9 swith trinary code while the board on my door opener motor has only 8. Who would know how to program? I've tried programming the first 8 leaving #9...

How to program garage to open from my Vehicle without remote [ 1 Answers ]

I have a 2008 Mercedes Benz C300 and I am trying to program my car to my garage door opener, I lost the remote and had it programmed in my other car but mistakenly erased the settings. I have a Overhead garage door opener that was bought and put in 1992 Model is 555. The over head has three buttons...

Garage door opener making loud noise and door won't go up [ 1 Answers ]

When I pushed the button to open my mom's garage door, the door went up about an inch and made a loud banging noise like a machine gun. We got the door to open by pushing on the button and pushing up on the door. The noise is coming from the part in the middle of the garage door that goes down...

How do I sync the keyless pad garage door opener to the main garage door opener? [ 3 Answers ]

I mistakenly gave someone my garage door opener that didn't return it. I had a male friend come over and "change the code" including my car opener and gave me a universial which he also programmed. I came to realize my code for my keyless pad outside doesn't work (since he changed the code... )....

View more questions Search