Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pool pump wiring
[ 2 Answers ]
I've a 220 V, singele phase, 1 HP pool pump with recommended 14 wire size. The wire bundle contains blank, white, and a ground. I'm trying to install a time switch to control the pump operation but not so sure about the wiring connection. My question is which color of wire is going to the load?...
Pool heat pump wiring 220v
[ 6 Answers ]
I have an older pool heatpump that needs 220v 25amps. I have 10/2 wiring to a 25 amp breaker in my box. I test 120v on each (black & white) to the ground wire. Nothing seems to work. I can bypass to get the fan to work, but it barely spins. Seems like I'm working on 1/2 power. I'm obviously no...
Wiring pool pump motor
[ 1 Answers ]
I have a new pool pump motor. When I disconnected the old motor, I found it was wired with two blue wires and a green ground. The new motor has only L1 nad L2 connections. How do I tell the difference?
Pool pump wiring
[ 1 Answers ]
My electrician made a 4' mistake in running a new line to our pool. Instead of going to all the trouble of running a new line I would like to just replace the plug wire coming from the pump. I don't know squat about this. What does SJTOW mean?
Wiring a pool pump and switch
[ 1 Answers ]
I am trying to wire a new switch to my pool pump it is a 230 volt. I have a new switch( 240v 30amp double pole single throw), but I do not know how to connect the wires. I have a red a white and a black wire and a bare wire. The is no designation on the switch as to where which wire should go... View more questions Search
|