 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore washer switch lid repair details
How do you install the switch lid to the kenmore washer,what tools are needed and where is everything located? I need to replace the part that when you close the lid,the washer starts,the little button in the little hole on the lid area
|
||||
|
||||
|
You will need to remove the top or at least lift it up. Generally the top of a washer is held in place at the front edge by spring clamps. Gently pry between the top and the front of the washer. Be careful to not chip the enamel. Once the top is removed or lifted, you should have access the switch. Watch what you are doing. Every time you think you have something figured out, they change the way things are done. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
:eek:Help I am trying to find a free online repair manual for a Kenmore washer for a friend. I guess it is an 80 seres with model # 110.92587210. Thank You.
I have an old Kenmore washing machine - 19 or 20 years old! It has never given me any problems until now! It fills and agitates but won't drain or spin. It will drain and spin, though, if I stick a screwdriver into the little hole inside the washer's top opening. It's the hole that the little stick...
Ok so I have a somewhat new Kenmore washer well 2 or 3 yrs and it recently stopped switchin cycles. I have to manually switch from wash to spin and then rinse and so on. Anybody no what the problem is? Thanx:confused:
Dear Help Desk, I've got a Kenmore Series 80 Washer, model #92588210. Everything works fine except the spiral-shaped "tower" in the center of the drum. It does not turn, and consequently does not pull down the clothes. The agitator at the base of the "tower" works fine, though. My main...
What is the purpose of centrifugal switch
View more questions Search
|
