Ask Experts Questions for FREE Help !
Ask
    patramn's Avatar
    patramn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2009, 11:07 AM
    Fan Switch
    I have a 9 year old hunter fan. It came with a two wire wall switch which has an on/off button and light and fan control button. All you have to do is to press the light or fan button to change the brightness or speed. It does not function anymore and I try to get a replacement but they all have three wires to connect to the wall. Does it mean that one of the wires have to be connected to the ground wire?
    Thanks for your assistance.
    Naresh Patram
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 2, 2009, 09:47 PM

    Contact Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats for replacement parts. Call them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing fan motor relay switch with upgraded switch [ 4 Answers ]

Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...

Connect a port on a remote switch to a secure segment on the local switch [ 4 Answers ]

I have 2 Netvanta 1224R switches. On the main switch I have 3 Vlans setup. Vlan1 = main network (example IP 123.231.5.1) Vlan2 = Web Access (Example IP 69.115.851.202) Vlan3 = Secure segment (Example IP 123.231.8.1) On the remote switch I have 1 Vlan. Vlan1 = Main network (example IP...

Change Pilot Light Switch with a Single-way Switch [ 1 Answers ]

It's worth noted that I am a complete novice, so please be patient with me. I want to replace an existing pilot light switch with a single-way lighted switch. The existing setup has four terminals (red wire, black wire, white wire, and ground wire). The red wire goes to the left, the black wire...

HEAT-OFF-COOL system switch - AUTO-ON fan switch [ 1 Answers ]

From an Email: ''Dear asklabman, I am a first time house ownere & having an issue with my Honeywell T8112 Programmable Thermostat. Thermostat has two switches for the fan - AUTO FAN & FAN ON switches and three switches for thes system, COOL, HEAT & System OFF modes. Yesterday we turned ON...

HEAT-OFF-COOL system switch - AUTO-ON fan switch. [ 2 Answers ]

Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the...

View more questions Search