Ask Experts Questions for FREE Help !
Ask
    djspenser's Avatar
    djspenser Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 27, 2009, 01:02 PM
    Maytag Dryer PF error
    I have a Maytag Neptune gas dryer. I get a lot of PF errors. I know that the PF indicates a power failure, but there always seems to be an excessive amount of heat in the dryer when I get the error code. Is the problem strictly power, or is there a relationship to the heat? How do I fix the problem?

Check out some similar questions!

Maytag Dryer MDE5500AYW, 8.8. Error code [ 12 Answers ]

My Maytag Neptune Dryer, Model MDE5500AYW, Serial 36492683ZF, has "8.8." on the display panel and will not respond to any control input. The power went out and when it came back on the panel was showing "8.8." and the code will not clear. I have reset the circuit breaker, and unplugged the dryer...

Maytag Dryer putting out a black substance inside my dryer [ 1 Answers ]

I need to know why my Maytag Gas dryer is putting out a black substance in my dryer that is also along the vent area as well. When I clean out the lint container it's full of black?

Maytag Neptune Dryer displays a tS/t5 error [ 1 Answers ]

Hi, Model No. MDE9700AYW Ser No. 12569849GJ Displays a tS/t5 error. The manual calls this a "Heater Temperature Control Problem. Where is this controller and how do I replace it? How do I clear the error? I unplugged the dryer and left it for a few minutes. When I plugged it back up and...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.