Ask Experts Questions for FREE Help !
Ask
    richamor's Avatar
    richamor Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 10, 2008, 09:18 PM
    Maytag Neptune Dryer displays a tS/t5 error
    Hi,

    Model No. MDE9700AYW Ser No. 12569849GJ

    Displays a tS/t5 error. The manual calls this a "Heater Temperature Control Problem. Where is this controller and how do I replace it? How do I clear the error? I unplugged the dryer and left it for a few minutes. When I plugged it back up and tried to start the dryer, the fault came back up. The dryer is now dead and will not start, even after sitting several hours.Thanks

    Of course, the machine is 3 months out of the factory 2yr parts warranty. This'll be my last Maytag.
    Chekman's Avatar
    Chekman Posts: 1, Reputation: 1
    New Member
     
    #2

    Sep 25, 2008, 06:35 PM

    I have the same dryer same code, same problem!
    I can tell you that I have already tested all the sensors and the heating element.
    Had dryer unplugged for 4 days and still get the code.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Neptune Dryer has no heat [ 4 Answers ]

I have a Maytag Neptune electric dryer Model# MDE4000AYW, Serial # 28635363YK. I had dried a load of clothes (that took a normal amount of time to dry) and put in a second load to dry. After about three hours I realized the dryer was still running (Yes, I am one of those people that sometimes...

Maytag Neptune dryer wiring [ 1 Answers ]

I have a Maytag Neptune Dryer MDL# MDE5500AZW I took it apart to recover a piece of jewellery and put it back together without attaching the wiring lines back to the door switch.:o I can not remember how they re-attach. As I assume one is a ground and the other two are power feeds... I do not want...

Maytag Neptune dryer not drying well. [ 6 Answers ]

I have a Maytag Neptune dryer and it doesn't dry well at all. I am used to putting big loads in it and I don't know if it's too big of loads or what but like 7-10 pairs of jeans and it takes at least 5 hours to dry them... if then. The sensor seems to work but shuts itself off before they are...

Maytag Neptune dryer doesn't dry [ 1 Answers ]

My Maytag Neptune dryer doesn't dry cloths. It tumbles but seems no air enters the dryer. Can't tell if it is a problem with the thermistor, fan or heating element. How do I go about troubleshooting the problem.


View more questions Search