Ask Experts Questions for FREE Help !
Ask
    Homer2's Avatar
    Homer2 Posts: 11, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2006, 05:14 PM
    Replacing basement windows
    Hey all.
    I want to replace the basement windows. My house is 5 years old and the basement windows are only single pane. I have changed windows before but not with metal surrounds.
    How is the metal window held in the concrete wall? What kind of fasteners do you use to install the windows?

    Thanks
    Homer2
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Oct 19, 2006, 06:38 PM
    Some windows are set down into notches in the blocks before the plate is put on the foundation. If so, you might have to remove the glass, and cut the frames at the top and bottom with a Sawsall or cut off wheel. If you want to conserve heat, adding storm windows could make more sense.
    Homer2's Avatar
    Homer2 Posts: 11, Reputation: 1
    New Member
    		  
    #3

    Oct 19, 2006, 07:17 PM
    It is a solid wall. No blocks. I was thinking maybe I could leave the old ones in and just put the new double pane one next to it. Don't know if that would be a good idea or not.
    Homer2
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #4

    Oct 19, 2006, 07:58 PM
    Don't see why not. Tapcons are very poplar for fastening to concrete now. Just drill I think a 5/32'' hole and run the hardened steel screw in. Where great mechanical strength isn't needed, I use construction adhesive. Not Liquid Nails. It is meant for interior use. Look for the stuff rated for exterior use. I have used stuff from both Ace Hardware and Lowe's.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing basement shower with bathtub.. [ 13 Answers ]

Hi guys. So, I need to replace a basement shower with a bathtub. I replaced tubs before, not that hard. However, I've never quite done this, and I'm concerned about the drain. Obviously, I'd like to move it a bit, maybe a foot or so. How hard is it to adapt what's there to a bathtub drain. ...

Retrieve Windows XP key but Windows won't boot [ 3 Answers ]

I have an HP machine that has had the case replaced (meaning the sticker is no longer stuck to the side of the case.) It also didn't come with any media (the restore partition is corrupted.) All I need to do to fix the booting problem is run a repair but I cannot get into Windows to retrieve the...

Replacing neo angle shower pan basement [ 1 Answers ]

Greetings... I want to replace my neo angle shower walls and floor pan. I have no problem with the door, walls or working around the shower valve but I am stumped as to how to remove the shower pan and drain from the drain line pipe. Its all relatively new plumbing (6 yrs... plastic piping). What...

Can't load windows, Can't get into safe mode and can't reinstall windows. [ 2 Answers ]

Help! I can't get windows98 SE to load. I can't get into safe mode or reinstall windows. A little history first. I had an issue with my creative sound card. EMM386 not loading along with something that had to do with the sound card. I went back and forth with creative tech support to resolve the...

Replacing a bathroom in a basement [ 4 Answers ]

Okay after 7 years in my house I am finally re-doing my basement. It was finished but the previous owner didn't think the project out very well and he cut a lot of corners. It's taken me several months but I have completely removed everything he did. I assumed the plumbing was roughed in but...

View more questions Search