Ask Experts Questions for FREE Help !
Ask
    hondad's Avatar
    hondad Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2009, 07:09 AM
    Kenwwod faceplate lights don't work.
    I have a Kenwwod KDC-215-S cd player that's always worked very well... Now I turn it on and the faceplate lights don't come on... the player works fine but no lights... I heard the bulbs in the faceplate might be bad so I took the faceplate apart and there are two bulbs facing each other attached to a cicuit board... could one of these be bad?. and how the he// am I going to replace when they are attached to a circuit board?. what a pain... I have never seen anything like this before, any help is appreciated...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 25, 2009, 07:23 AM

    Can you tell the voltage of the bulbs, Led?
    You could slowly apply voltage at board conncections and see if they light.
    Are they SMD's?(mounted ON board, no pins through board).
    hondad's Avatar
    hondad Posts: 12, Reputation: 1
    New Member
    		  
    #3

    Jul 25, 2009, 07:48 AM

    It looks like one bulb is through the board and has "130" on the bottom side... the other does not look like it goes all the way through like the first one...
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Jul 25, 2009, 09:17 AM

    Can you power up and measure voltage across the bulb?
    hondad's Avatar
    hondad Posts: 12, Reputation: 1
    New Member
    		  
    #5

    Jul 25, 2009, 12:04 PM
    I wouldn't know how to do that...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lights don't work? [ 3 Answers ]

All of a sudden, the lights in my family and the light in the laundry room stopped working. The rooms are next to each other. The washer/ dryer have not been affected. In the family room, the outlets on the same wall as where the switch for the lights is, don't work. And when I plug an outlet...

Ceiling fan lights won't work. [ 3 Answers ]

I have installed a Harbor Breeze ceiling fan light kit and everything works OK except the lights. The instructions say to connect the white wire in the kit to the white wire in the fixture, and the black wire in the kit to the blue wire in the fixture. It doesn't work-any ideas?

Lights do not work in ceiling fan [ 1 Answers ]

All three bulbs will not work in ceiling fan. Fan works OK; how do I fix?

Ceiling fan/lights work fan won't [ 2 Answers ]

We have had a ceiling fan in out family room for years. One day the fan just stopped working but the lights continued to work. We assumed the motor on the fan burned out. My husband recently put in a new Hampton Fan and when we tested it the lights worked, but the fan turned for a second then...

My lights won't work right! [ 1 Answers ]

Okay, this is a complex questions but I would appreciate ANY help in regards to it. My downstairs bathroom and laundry room are right next to each other and the lights won't work any more in either room. They will sometimes flicker on but will go out again. All other lights throughout the house...

View more questions Search