Ask Experts Questions for FREE Help !
Ask
    Aliwa81's Avatar
    Aliwa81 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2009, 05:05 PM
    Resitting router
    I resit my router and it wouldn't work again I need to know what to do after you made this mistake
    Aliwa81's Avatar
    Aliwa81 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 24, 2009, 05:07 PM
    Somebody told me you got to use 192.168.1.1 and you will find the stiings there adjust them
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #3

    Jul 25, 2009, 12:38 PM

    Try 192.168.0.1

    Try unplugging the router for about 30 secs and connect again

    If that does not help, start from scratch

    Unplug router, uninstall any software that was installed with router
    -follow instructions as if router was just purchcased and you are installing for first time
    PCmania's Avatar
    PCmania Posts: 4, Reputation: 0
    New Member
    		  
    #4

    Jul 26, 2009, 11:35 PM

    If you have set the user name and the password, of your router, that's the time to type the 192.168.1.1, if the router does not set, 1292.168.0.1, If the router does not work try to unplug all the connected cable wire, then after 5 minutes plug it again.
    lexy_08's Avatar
    lexy_08 Posts: 12, Reputation: 1
    New Member
    		  
    #5

    Aug 18, 2009, 04:25 AM

    The Ip 192.168.1.1 is default for some routers but not all.

    What's the brand of your router?
    Who's your internet service provider?

    These are essential information needed so that you can configure your router properly
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Resitting vapor sensor on h2o heater in lockout? [ 1 Answers ]

I need the lock out codes, or reset procedure for my Rheem h2o heater. It is a powervent, Robert shaw, low nox, gurdian system, 40 gal. residential. Model# 42VP4OSF I was painting my floor & the vapor sensor got tripped. It is now in lockout mode. I have tried turing off the power, & reseting it...

Changing wireless router Linksys WRT54GS to a wired router [ 8 Answers ]

How can I disable my wireless router to a wired router. The model is a Linksys WRT54GS.My two computers are now in one room and do not need to be wireless.I will be using a 50ft. Cable. Does it make any difference if the color of the cable is blue or yellow ?

D-Link Router DI-624 router settings log in issues [ 2 Answers ]

I'm having serious problems getting into the router settings of my D-Link router. Someone other than me messed with the Admin log in supposedly changing the password. I've attempted to "reset" the modem several times, and use what D-Link says is the admin log in of "Admin" and no password, but it...

Router within a Router - Connection problems [ 1 Answers ]

I'm trying to set up a wireless network to be able to use my laptop, but am having problems getting everything working; The wireless is "Connected" yet I'm unable to access the internet, or ping the default gateway. The current setup consists of a Zyxel Prestige 643 (The "internet gateway", a...

View more questions Search