Ask Experts Questions for FREE Help !
Ask
    ricktharula's Avatar
    ricktharula Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 8, 2009, 01:21 AM
    My thermostsat says recovery and don't not come on
    My honeywell pro th411od thermostat went blank. I detacted it and found there was no batteries, so I put some in. it powered back on and I set it for auto timing, but the screen shows everything normally. But now it says recovery and don't not cut on. What do I do
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 8, 2009, 04:49 AM
    It is possible your thermostat is not getting power from the inside unit and that would be the reason you had to put batterys in it. Check to be sure all circuit breakers and switches are turned on. Here is the manual for the thermostat. There are other possibilitys like a blown fuse on the circuit board if so equipped or a burnt out transformer.

    http://customer.honeywell.com/techli...69-1760EFS.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Windows recovery? Can I create a recovery partition? [ 4 Answers ]

I had to fix a computer for a friend. He got viruses on the computer and I have to do a destructive wipe and completely reinstall a fresh copy of windows. This is not the first time it happened and I am looking for a way to cut down the time it takes to fix this thing when it happens again in...

If you don't like long.then don't read or awnser. [ 1 Answers ]

Hey my name is Jhaunt'e... and I need help... well here goes lol... im a 16 yr old junior and this 14 yr old freshmen named Raven started talking early 2008... well it got a little farther along and we were on the bus on the way 2 school and I gave her a note that said I like you (I was shy back...

View more questions Search