Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Slow Bathroom Sink Drain - but Tub and Toilet Drain Fine
[ 4 Answers ]
I am hoping that someone can offer a suggestion to solve my problem. We recently purchased a 60 year old home. The sink in one of our bathrooms drains completely fine until the water has run for about 5 minutes and then all of a sudden it starts to back up and then drains very slowly. I have...
New Floor and Toilet
[ 3 Answers ]
I am replacing the floor in my bathroom. I will be laying down 1/4 subfloor and then placing vinyl stick-down tile. My question is do I cut around the toilet, or do I extend the ring somehow and place the toilet on top of the new floor. I'm just afraid of the toilet leaking because of a not so...
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to...
Smelly floor around the toilet
[ 5 Answers ]
We had a bit of an overenthusiastic time with the plunger, and it resulted in a leak in the wax ring of the toilet. We fixed the leak, but now there's a smell coming from the floor. I was wondering if there's a good way to take care of this without ripping everything out and apart to get rid of...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search
|