Ask Experts Questions for FREE Help !
Ask
    Garyh623's Avatar
    Garyh623 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2009, 04:36 PM
    Limited pressure with power washer
    Pressure is not operating at the 2200 psi that it should, what could be the problem?
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Jun 29, 2009, 06:43 PM

    Hi, Garyh623!

    What kind/brand of pressure washer is it? Also, this might not be correct, but it's something that I heard, is that the electrical current needs to be large enough so that the pressure washers will operate at their optimum capacity. So, the outlets and any electrical cords need to be strong enough.

    Again, that might not be correct, but might be something to consider.

    Hopefully, others will also come along to address your question.

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power washer - lost pressure [ 1 Answers ]

I have a Sears Craftsman power washer (580.752060 - 2500PSI max and 2.3 gpm max) I have used it with no problems for the past several years and I trotted it out this morning to wash my deck - it fired right up and ran fine for about a half hour - plenty of pressure - no problems, when it suddenly...

Limited power of attorney [ 2 Answers ]

Can a wife sign her husbands name to a legal document without his permission? If not, can she take the matter to court and get a judges permission to sign it if it is an important matter like signing over property that he agreed to sell but now refuses to transfer.

Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...

View more questions Search