Ask Experts Questions for FREE Help !
Ask
    sirishag's Avatar
    sirishag Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 28, 2009, 05:13 PM
    Hunter fan when light is switched on the fuse is stripping
    I bought hunter fan and fixed it to ceiling.When I switched on fan is working but when I turned my light switch on my entire bedroom unit fuse is stripping off.Please help what should I do.

    Thanks----
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Jun 30, 2009, 12:26 PM

    Sounds like you wired it wrong. How did you wire it at the ceiling and at the light kit?

    Ceiling fan wiring - Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can light turn on and off while switched on [ 3 Answers ]

When my can lights in my kitchen, hallway and living room are turned on some of them turn off seemingly in no particular order. There is a sound that is mechanical when this happens, like a click, almost like they are to hot and there is a safety switch. I have installed 60 watt light bulbs and it...

Circuit breaker tripping when light switched on. [ 32 Answers ]

I just installed a chandelier light fixture to a pre-existing junction box in my condo. When I flip the electricity back on for the room however, the fixture lights up in spite of the light switch being in the OFF position. When I flip the light switch to ON, the breaker trips. Is the problem...

Adding another switch leg to a 4way switched light [ 5 Answers ]

OK, the walls were open when I did this so hopefully I got the right wire types in before I closed her up! I have a dining room with 4 entry points and I've put a switch box at each location. The power is fed to this lighting circuit through the room lights junc. Box. I ran a 2 plus ground...

Craftman battery light on when blades switched on [ 6 Answers ]

Hello, My craftman 12 HP has electral switch to engage the cutting blades, when engaged the dash light for Battery charge will come on, I can't find a short or anything wrong with any wires. What can cause this? Thanks

Light at own home produces sound when light at neighbor's house is switched on [ 4 Answers ]

I've moved into an apartment. I noticed that whenever I switched on my fluorescence light and when my neighbor switches on his light, my fluorescence light would produce a 'rrrrr' or 'mmm' sound which sometimes can be loud and irritating. I have tried changing the light bulb and even the ballast...


View more questions Search