Ask Experts Questions for FREE Help !
Ask
    startryn's Avatar
    startryn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2009, 11:04 AM
    How do I wire a condenser to my coil?
    I need to wire a used goodman 2.5 ton condenser into my existing armstrong unit (coils have never been used). I can't find wiring diagrams at either the armstrong or the goodman websites. The condenser model # is CKL 30-16 and the coil is # CZE36C-1 (advantage 93). Thanks for any help.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 28, 2009, 08:20 PM
    DON`T UNDERSTAND what you are asking
    Are you wanting to wire the low voltage that tells the contactor to kick in?
    The high voltage 230 volt to give it power to run?
    You spoke of the coil cze36c-1, has the evaporater coil been connected to the condenser unit with the proper copper line set,(has it been vaccumed out)?
    Need more info on what you are asking
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does a 3 ton coil match up with a 2 ton condenser unit [ 19 Answers ]

I have a new Payne brand 2 ton central air unit that was installed by my home warranty company, and after two months and after they sent out three different companies to try and fix my cooling problem, the last company decided that the original Carrier brand system that has been in my home for 26...

Thawing condenser coil. [ 9 Answers ]

Condenser coil is frozen solid. What is the best way to thaw it out. Right now we have the heat off and fan running. We have also explosed the coils and have a heater on it. Would it help to cut the freon off and if so how. Bryant heat pump - Carrier condenser. Thanks

Brand NEW condenser/coil - still warm air [ 5 Answers ]

I just had a brand new 2008 goodman unit - complete condenser and coil. Yes it is on the roof but that's my only option. I have 1200 sf and vaulted ceilings. I believe we removed the 1 ton and put in a 2 ton. It cools off enough at night that AC isn't really needed until about 10AM then by noon...

Does a 4 ton evaporator coil match up with a 3 ton condenser? [ 1 Answers ]

We just moved into an 11 year old house last month. The AC has not worked properly since we moved in. The first AC guy the Homeowners Warranty company sent cleaned the unit and added freon. A month later, it was 83 degrees downstairs today. Last week they sent another guy and he found what he...

Copper Condenser Coil [ 1 Answers ]

Is it possible to solder a hole shut in the copper tubing that feeds freon throughout the coil? I believe the hole in the pipe that runs verticle from the compressor to the coil. Thanks. Dave

View more questions Search