Ask Experts Questions for FREE Help !
Ask
    jkennedy99's Avatar
    jkennedy99 Posts: 36, Reputation: 3
    Junior Member
    		  
    #1

    Jun 26, 2009, 08:44 AM
    Duct insulation
    I have condensation and some dripping water from a duct in my basement (unfinished). Based on the threads I've read, it seems like covering the duct in insulation will fix this. However, I can only cover three sides of the duct, as the top is butted up to the ceiling. Will covering the three sides help, or will more condensation form on the uninsulated top?

    Also, I have some leaks on some of the duct seams. Would you recommend sealing those leaks first and then applying insulation, or will the insulation be enough to stop the leaks?

    Thanks,
    Joe
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 26, 2009, 08:53 AM
    I have some leaks on some of the duct seams. Would you recommend sealing those leaks first and then applying insulation

    YES

    If you have a high moisture basement a large stand alone dehumidifier is a good cure. I would try that before the insulation since you cannot encapsulate the entire duct.


    The problem is the duct is cold and that makes the duct act as a evaporator of sorts collecting moisture on it. You might also make sure your A/C drain line is not restricted preventing complete flow to the drain.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Jun 26, 2009, 12:42 PM

    Do you have any ac registars it the basement? Cut in a few supplys and your problem will probably go away.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jun 26, 2009, 01:03 PM
    Never cross contaminate basement air. As the air is forced into the basement all it will do is force the Vapor laden air into a return air somewhere somehow. This can create a great place for mold and mildue to form especially in the ducts. Then you can spend the big bucks having a specialist clean them all. LOL

    The moisture needs to go away not be recirculated into the home.
    jkennedy99's Avatar
    jkennedy99 Posts: 36, Reputation: 3
    Junior Member
    		  
    #5

    Jun 27, 2009, 07:00 AM
    I do not have any returns in the basement (looks like the prior owner sealed it off). I do have one supply register and it is open. Based on your comments, sounds like I should close that off as the cool air is cause at least part of my condensation issue?

    My basement is unfinished and we don't use it much, I am only worried about high humidity causing mold. I do have a dehumidifer but don't run it enough is my guess.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #6

    Jun 27, 2009, 09:03 AM
    I do have a dehumidifer but don't run it enough is my guess.

    Run it to get rid of the moisture.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the 2x250 , 2x450 in acoustic duct insulation [ 1 Answers ]

Dear sir / mam You may know answer this .

In-line duct fan [ 3 Answers ]

Need to connect an in-line duct fan to a ductstat. In line fan has white (common) wire - black (hot) wire and green (ground) wire. Ductstat is a 110 A/C outlet. Need to make a plug from fan - which will connect to ductstat

New insulation over old atic insulation [ 1 Answers ]

Presently there are three layers of aluminum with air spaces. Can I put bats directly over this insulation and what do I have to be concerned about.

Duct fan [ 2 Answers ]

To the side of our house I added a bedroom and a bathroom. New area has an almost flat roof attached under the gutter of old house. The new floor is 27 inches lower than old floor. To get heat and air to new room I came off the end off trunk line in attic with a 90 dropped 27 inches and turned...

Flexi Duct vrs Aluminum Duct [ 4 Answers ]

I am adding an addition onto my house. The local building inspector has already told me my HVAC unit is more than adequate in size to support the addition. The old duct vents are aluminum. Can or should I use flexi venting in the new part? What are the pros and cons of these two types of vent...

View more questions Search