Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Condensation leake
[ 1 Answers ]
My trane airhandler is not draining condensation.The water is backing up in the return duct.. The pvc drains are clear,but the water is being blocked.. How do I check the inside of the unit for a blockage?
Anti-siphon leake and can't get handle off
[ 7 Answers ]
Ok, so I have read up on some of the threads on this topic, but can't seem to find the answer. I have the attached faucet on the outside of the house. When the hose is connected, there is water leaking out of the anti-siphon (at least I think that is what it is - the grey thing on the top). I...
Daylight basement water leak, cause by broken water pipe or saturated ground water?
[ 1 Answers ]
I have a 6 units 3 stories with daylight basement apartment. Build in 1960. Just bought it few months ago. Last year the previous owner had a bad flood in the daylight basement after long period of rain. They cleaned out the area, remodel it. Good for few months, last couple of weeks rain long... View more questions Search
|