Ask Experts Questions for FREE Help !
Ask
    quickwillie's Avatar
    quickwillie Posts: 18, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2009, 04:26 PM
    Engine removal
    I have a simplicity lawn tractor and I need to remove the engine to replace the exhaust pipe. It has a 18hp engine.Don't know the year.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 16, 2009, 08:36 PM

    You may not know the year but bet you can find the model number. Try this to get a manual Manuals / Simplicity
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20 HP Vtwin briggs engine pulley removal? [ 3 Answers ]

I have a 20 HP Briggs that needs the engine pulley removed. There were two pulleys on the shaft. The lower pulley was removed by simply removing a bolt at the lower end of the shaft. The upper pulley looks to be keyed for the shaft. I can not get this pulley to come loose. I have tried about...

Husqvarna 155 rider - 15.5 hp kohler engine removal [ 1 Answers ]

Hi folks. I have a 15.5 vertical shaft Kohler Command engine (CV15S) that I am attempting to remove from the tractor frame. Think it threw a rod! All bolts and connectors on engine are removed except the vertical shaft. I am requesting help on procedure to remove shaft from tractor that includes...

Bearing removal of small engine [ 2 Answers ]

Hello I am trying to replace piston and rings in 3 hp briggs engine and on the crankshaft side without the flywheel there is a ball bearing that I can not get off and I don't want to damage the crank. Any suggestions? Would a puller work without damage? Thanks

Pulley removal B&S small engine [ 1 Answers ]

How do you remove the drive pulley from the drive shaft on a Briggs and Statton engine?

View more questions Search