Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
B&s 16hp engine
[ 3 Answers ]
Hi. First time user so will get to the point. I have an older 16hp ROPER garden tractor with a 16 hp engine.I have recently put in a set of rings(std.) and changed to an electronic coil.I have also had the valves ground.Now begin the problems. I have a hard time getting the engine to...
B&s 14.5 HP - Drive Pulley
[ 1 Answers ]
The keyway is gone, when I try to loosen the bolt, the engine turns. How do you remove the bolt in question when you do not have impact tools available?
Changing Engine Pulley?
[ 5 Answers ]
I have Sears riding Lawn Mower with Brides & Stratton engine and it's engine pulley broke off. There are two pulleys attached to this shaft. How to remove and replace this shaft? It's attached to the engine. Thanks.
Removing MTD engine pulley
[ 3 Answers ]
I need to replace my drive belt but cannot get the pulley off, motor spins? Any suggestions? Also it is reverse thread correct? Thank You
MTD Engine Pulley replacement
[ 2 Answers ]
I've got an old ('89) MTD lawn tractor with a 12hp B&S engine, 38" cut. The engine drive pulley has come apart and needs to be replaced. I can find replacements, but my question is how does the old pulley come off? It seems like there is a nut holding it on. Normal or reverse threaded? How do I... View more questions Search
|