Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connect a port on a remote switch to a secure segment on the local switch
[ 4 Answers ]
I have 2 Netvanta 1224R switches. On the main switch I have 3 Vlans setup. Vlan1 = main network (example IP 123.231.5.1) Vlan2 = Web Access (Example IP 69.115.851.202) Vlan3 = Secure segment (Example IP 123.231.8.1) On the remote switch I have 1 Vlan. Vlan1 = Main network (example IP...
Change Pilot Light Switch with a Single-way Switch
[ 1 Answers ]
It's worth noted that I am a complete novice, so please be patient with me. I want to replace an existing pilot light switch with a single-way lighted switch. The existing setup has four terminals (red wire, black wire, white wire, and ground wire). The red wire goes to the left, the black wire...
Trying to hook up a new celling fan but wires don't seem right
[ 18 Answers ]
Hello, A few days ago I took down an old celling fan to find the older one was not put up right. It only was screwed to a block of wood so I removed that and put up a bar and box supported on the beams of the house. Anyway that was my first problem that I ran into the next one was the wiring . I...
Converting pull switch lights to wall switch
[ 3 Answers ]
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...
Hampton Bay Celling Fan
[ 4 Answers ]
Ok I have a problem... My sister put this Celling Fan in my mom's house... and now she has moved out. The Day after she moved out that Lights stopped working... the fan is still working from the cord only... the lights won't turn on at all. The remote will ight up and we have changed the battery... View more questions Search
|