Ask Experts Questions for FREE Help !
Ask
    twines's Avatar
    twines Posts: 2, Reputation: 1
    New Member
     
    #1

    May 27, 2009, 05:00 AM
    How do you change the deck belt on a John Deer L120?
    I have got it 90% done but I can't remove the pully at the rear of the deck to get the new belt past the guides. Any suggestion?

    Tom
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    May 27, 2009, 07:32 PM

    Have you pulled back on the spring loaded tensioner pulley? john deere belt diagram - Google Image Search
    twines's Avatar
    twines Posts: 2, Reputation: 1
    New Member
     
    #3

    May 28, 2009, 02:51 AM
    I revisited the pully yesterday and found that working in a bit and it popped right off. The belt is now and installed and I am putting the deck back on today. The only reason I didn't finish was that the ground was wet and I couldn't cut anyway. Thanks for responding.

    Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deer L120 front axle [ 8 Answers ]

We purchased a john deere l120 from home depot in February of 2004... it hasn't been THAT bad of a mower but it has had its problems. Every year I take the time to mow 3.4 acres and I do take pride in my yard and in my mower So the first cut of the season I was mowing and I was just about to...

John Deere L120 - engaging mower deck stall tractor [ 1 Answers ]

When I engage the mower deck on my JD L120, this one is from a JD not Lowe's or HD, the tractor stalls. Manually pulling on the belts I am able to turn the blades. Tractor is 3 years old and used for residential moving.

John Deer L120 [ 1 Answers ]

I have a John Deer L120 Lawn Tractor and something is blowing the 20amp fuse which in turn shuts down the all power. Looking for ideas?


View more questions Search