Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   How do you change the deck belt on a John Deer L120? (https://www.askmehelpdesk.com/showthread.php?t=358333)

  • May 27, 2009, 05:00 AM
    twines
    How do you change the deck belt on a John Deer L120?
    I have got it 90% done but I can't remove the pully at the rear of the deck to get the new belt past the guides. Any suggestion?

    Tom
  • May 27, 2009, 07:32 PM
    ballengerb1

    Have you pulled back on the spring loaded tensioner pulley? john deere belt diagram - Google Image Search
  • May 28, 2009, 02:51 AM
    twines
    I revisited the pully yesterday and found that working in a bit and it popped right off. The belt is now and installed and I am putting the deck back on today. The only reason I didn't finish was that the ground was wet and I couldn't cut anyway. Thanks for responding.

    Tom

  • All times are GMT -7. The time now is 01:23 AM.