Ask Experts Questions for FREE Help !
Ask
    jonmoore's Avatar
    jonmoore Posts: 5, Reputation: 1
    New Member
     
    #1

    May 21, 2009, 10:14 AM
    Well Pump
    If my well pump motor is seized does that mean I have to get a new motor?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    May 21, 2009, 10:43 AM
    Quote Originally Posted by jonmoore View Post
    If my well pump motor is seized does that mean I have to get a new motor?
    Not necessary. The impeller could have broken and jammed the motor. Have you pulled the pump apart and checked to see if the shaft turns free? Regards, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Submersable Pump - 220 volt - Capacitor Overheating - Pump Shutting Off [ 16 Answers ]

My 220 volt submersable well pump stopped working. We took the capacitor in to be checked one day and it was fine. The next day we took the relay in and it checked out. The following day I pressed on one of the wires that goes to capacitor and the well came on. The wire was old so I knew it...

Pump pressure switch for well pump [ 3 Answers ]

I was wondering if seomone can help me I have a pressure switch which has a little leak but I can't really tell how I could fix it doesanyone have any suggestions or pics on how to fix it

Can same sprinkler pump serve as wet riser pump? [ 2 Answers ]

In a high riser building of about 100m height, a dry riser system is not visible as the firemen's vehicle can't pump water up to 100m. As such, av decided to have it as Wet riser. At same time I don't want introduce a separate pump to avoid over bloating of project cost. My sprinkler system must...

3/4 h.p. Pump control box running 1/2 h.p. Pump? [ 1 Answers ]

Will a 3/4 hp submersible pump control box run a 1/2 hp submersible pump?

Pool pump and booster pump timer diagrams [ 2 Answers ]

I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts


View more questions Search