Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring for Honeywell RTH7600D, old system was Honeywell T841A1217
[ 2 Answers ]
I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...
Honeywell thermostat wiring
[ 5 Answers ]
I've seen similar questions, but I need exact instructions. My old thermostat is wired as follows: W-Blue wire G-Green wire R-Red wire C-White wire Y-Yellow wire New thermostat has: Rh
Honeywell wiring
[ 1 Answers ]
My heater wire was cut and i wrapped it with electrical tape but after a time the wire gets hot and melts the tape, so i found another cord like it but i forgot which wire hooked to what except the ground wire now the heater light comes on but no heat is there somewhere i can get a look at the...
Honeywell wiring different from old thermostat wiring
[ 2 Answers ]
I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!
Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems
[ 1 Answers ]
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)... View more questions Search
|