Ask Experts Questions for FREE Help !
Ask
    BigSigh's Avatar
    BigSigh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2009, 01:21 PM
    Kenmore Series 90 Gas Dryer tumbles, but no heat
    I have a Kenmore Series 90 gas dryer. It tumbles and cycles fine, but doesn't provide heat to dry the clothes.

    I'm an amateur at repairs but am willing to learn and attempt to fix this if it's not too complicated.

    Any ideas?

    Model # 110.76912692

    Thank you.
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
    		  
    #2

    May 18, 2009, 02:16 PM

    Check out these tips. If you can't find the solution, post back and we'll help you.

    https://www.askmehelpdesk.com/applia...ng-324952.html

    You can buy Kenmore repair manuals at

    Fast Moving Whirlpool Brands Dryer Parts

    There are other places online. Note that Kenmore is now made by Whirlpool -- at least that's the way it seems by what I find.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 80 Series Dryer - no heat [ 3 Answers ]

:confused: I have a Kenmore 80 series dryer that tumbles but does not give any heat in any modes. We've cleaned the lint out and we have clear passage through the vent. This is a gas dryer. Any ideas? Does this have a pilot light maybe?

Kenmore 110 series dryer won't heat [ 1 Answers ]

I have a Kenmore 110.86870100 electric dryer. It won't heat and dry. We have already changed the heat element as it was bad (broken wires) but it still won't heat up, not sure what else to check.

Kenmore series 80 dryer no heat [ 2 Answers ]

I have a kenmore series 80 and it tumbles and heats just tumbles doesn't heat

Kitchen aid dryer tumbles but doesn't heat. [ 2 Answers ]

Kitchen aid dryer tumbles but doesn't heat. Must I call a repair person? Or can I try something

Sears Kenmore tumbles, but no heat [ 5 Answers ]

I have a Sears Kenmore dryer tumbles but no heat I replaced the Hi limit theremo and check the heating element. I am getting a ohm reading on the heating element but it does not heat up. Any help would be appreciated. Thanks MS

View more questions Search