 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What size jet pump do I need?
I just bought a new house and I have a well I'am trying to hook up for temporary water (not used to drink) to use in my bathroom until I get my rural water installed. The water is good, and was the original well that serviced the house. It is a shallow well. It is a piece of 2ft colvert pipe. The water starts about 12ft from the surface and has about 8 feet of water in it. I tried to pump it out with a small pump that moved 3 gpm for a hour and the water level didn't drop at all. What I need to know is what size jet pump do I need to pump the water up 20 feet, and to my house that is about 300ft away at a slight uphill incline?
|
||||
|
||||
|
!/2 Horse Shallow Well Pump ought to do the trick. For a selection of different brands click on; 1/2 hp well pump - Shop sales, stores & prices at TheFind.com
Good luck, Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have 1238 square ft. ranch house and it requires a heat pump system. What size heat pump unit is require heat and cool this house?
I have a submersible pump 1/2 horsepower 425 feet from the breaker box. It is going down hill. What size wire should I run from the box to the pump. What is the best place to purchase the wire (mesquite, Tx), THanks WIll
We would like to pump water to our garden from a shallow well. The distance is approx. 150 yds. Not exactly sure of the lift distance, I'm guessing at least 35-40 ft. The well is ten feet deep and then it is gradually uphill for about 150yds. I don't know how to figure the lift But we tried a...
How can you tell how may tons you have on a Rheem heat? I have a Rheem RPNL-042JAZ and was attempting to figure out if I had a 3 ton or a 3.5 ton unit.
View more questions Search
|
