Ask Experts Questions for FREE Help !
Ask
    barbleh's Avatar
    barbleh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 9, 2009, 10:24 AM
    Can't remove shower faucet cap
    Hello: I have a Delta Series 1400 shower faucet. I am told the handle is a "ring type". (There are 3-4 rings at the end of the handle (there is no handle per se, just a knob that turns to the left or right to turn the faucet on and adjust the temperature).

    I am havIing a problem with the temperature control and the ring behind the knob handle seems loose. I called Delta and the first step was to "unscrew" the handle. (It is about 2 1/2" in diameter). They suggested using vinegar/water solution to remove any calcium build up (which I did), but the handle cover will not budge. I can not put a wrench to it, as it would ruin the finish of the handle.

    Any suggestions most appreciated. Thanks in advance.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 10, 2009, 05:43 AM
    Try WD-40 on the threads and use a strap wrench,(see image) on the chrome ring. I also put up a exploded view of your valve to help. Good luck, Tom
    Attached Images
     
    Attached Images
  1. File Type: pdf Delta Models_1300_1400_5a03.pdf (277.1 KB, 233 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace 'O' rings and Gaskets in Delta Faucet [ 1 Answers ]

My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you

Shower faucet handle -has no screws? Remove? [ 2 Answers ]

My shower faucet handles are Elger shiny chrome 1 piece handles. Shaped like a fluted ball with a cylinder beneath it. They have no screws holding them on. They do have a small rectangular "cross pin" looking thing. It can't be driven out, and it may be a spring that snaps in an indentation?...

Remove shower faucet [ 2 Answers ]

I am trying to remove the faucet from my bathtub. The knob that you pull up so that the water comes out of the shower head broke. I have tried to unscrew the faucet and it won't come off it just turns and turns. HELP, PLEASE.

Water suppressor needed on lavatory faucet and shower faucet? [ 1 Answers ]

Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks

Remove Kohler faucet [ 4 Answers ]

I have a single handle pull out spray Kohler faucet. Can anyone tell me how to remove it. Thank you in advance.

View more questions Search