Ask Experts Questions for FREE Help !
Ask
    kimdean65's Avatar
    kimdean65 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2009, 10:52 PM
    Kenmore washer
    My belt came off and I need to know how to put it back on
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Apr 22, 2009, 09:57 PM

    kimdean65 - the first thing to do is to unplug the power cord from the wall <pull the washer out from the wall :: next remove the access panel from the bottom of the washer :: now you will have to loosen the motor mounting bolts and slip the motor toward the other end of the belt { loosen } now slip the belt back on and slide the motor back in the oppissat direction : when it is properly tight <it will have a 3/4 inch defelction inward ;; retighten the mounting bolrts ( tight) ,replace the access panel and move back in place and plug power cord back up ;; you should be ready to go to town with it now ;; if i have answered your question please rate my answer in the orange box at the bottom ::have a great day and god bless ::f.b.e.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore stack washer/dryer - washer makes noise during wash [ 2 Answers ]

My son has a Kenmore stack washer/dryer that makes a noise that sounds something like a gear when washing only. Could this be a transmission problem? Jay

Kenmore Washer [ 1 Answers ]

Kenmore Washer Model 417.40042990 washes, but will not advance to the next cycle. Thanks

Kenmore washer dryer combo 110-92966-102,washer agitates for a little then it stops. [ 0 Answers ]

Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...

View more questions Search