Ask Experts Questions for FREE Help !
Ask
    michaeljr47's Avatar
    michaeljr47 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 31, 2009, 06:07 PM
    Pulse furnace does not ignite
    I have a pulse furnace, or at least I think it is pulse because it has no pilot light, the fan will kick on and the you can hear the gas start to blow and then stop because it does not ignite, it tries a few times and then shuts down. The furnace worked fine and then it all of the sudden started this. Is there an easy fix I can try before I have to spend a lot of money on a repairman?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 1, 2009, 10:54 AM
    If your furnace is a Lennox pulse then you better call a repair person who has the knowledge to work on them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Pulse Gas Furnace? [ 5 Answers ]

I am having a diagnostic "nightmare"... only due to lack of knowledge of the Lennox Pulse. This is a roughly '90 model. 80,000 BTU... The problem: Furnace lights for about 10 sec- 2 minutes... shuts down... It resembles a primary air problem, sounds of the fire sucking air. A previous tech just...

Install Humidifier on Lennox Pulse Furnace [ 11 Answers ]

I want to install a whole house humidifier in a home with a Lennox Pulse furnace (Model Number G2103-80-1.) There's a schematice on the unit. I don't think it has a provision to provide power to the humidifier only when the heat is running, but I wanted to make sure. This is a really nice...

Furnace won`t ignite [ 1 Answers ]

I have an Armstrong Natural Gas Furnace,and the orange hose that goes to a sensor doesn`t work sometimes, and the furnace blows cold air. If I blow in the hose, it will work the next time, but I can`t do this all winter. It gets cold in the middle of the night.

Lennox Pulse Gas Furnace [ 1 Answers ]

Could you Please guide me to a source to obtain the Schematic Diagram of Lennox G14 or G21 Pulse Gas Furnace? I could not find the company web site!

Lennox pulse furnace fails to remain started [ 1 Answers ]

I have a Lennox G21 pulse furnace installed in 1993. The unit will start to pulse briefly - maybe 5 seconds or so, and then shut off. We've had two service calls recently. On one call they replaced a flapper, and on the other call did the pressure test, which passed. I've done a visual...

View more questions Search