Ask Experts Questions for FREE Help !
Ask
    Cant doit alone's Avatar
    Cant doit alone Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2009, 03:22 AM
    Can I cut the track for track lighting
    I have a 4 ft section of Hampton bay Track lighting. The instructions say do not cut.
    Can I cut it to size?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 15, 2009, 10:13 AM
    You must follow the manufacturer's instructions.

    Asking here for permission will not supersede the manufacturer's instructions.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Mar 16, 2009, 11:59 PM

    Interesting, the last time I bought track lighting the instructions said cutting the track was OK. It was Edison brand if I recall. Or Thomas. Heck I don't remember.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Mar 17, 2009, 05:15 AM
    CFR, what you probalby had was parts for a track lighting system, in which each part is separate, and the track can be cut. The dead end cap fittings are separate and need to be installed on open ends.

    A Hampton Bay unit is sold as a unit, complete with end fittings installed that cannot be modified. The kit is intended to be installed as is for DIY'ers.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Mar 18, 2009, 11:14 PM

    Didn't know they made such a thing! I've only dealt with the systems. Another thumbs down for Hampton Bay.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Track Lighting: 6 pendant lights/4 sections of track 2 lights not working? [ 4 Answers ]

Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...

Track Lighting [ 1 Answers ]

Do you know if there is a Track Lighting system that allows you to turn individual lights on or off on the track. I would like to have certain lights on the track on in the evening and the rest on the track off.

Cutting Track Lighting track [ 1 Answers ]

Anyone know why Hampton Bay track states that you cannot cut the track? Every other brand allows track to be cut to the needed length and Hampton Bay is worthless to me if I can't cut it.

Track lighting [ 1 Answers ]

I am trying to put in track lighting at my apt. My apt voltage is 120V and the lighting has a dimmer switch. However the pendant that I am trying to install says that if dimming is required use only an electronic low voltage transformer dimmer such as Commercial Electric SKU#731-638. My...

Track Lighting [ 2 Answers ]

I would like to install track lighting on the top of our kitchen cabinets to illuminate the ceiling. It appears this would be an "upside-down" installation. Safety and stability are my prime concerns. Can this be done safely ? Are there specific brands which are more suitable to this...

View more questions Search