Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cutting Track Lighting track
[ 1 Answers ]
Anyone know why Hampton Bay track states that you cannot cut the track? Every other brand allows track to be cut to the needed length and Hampton Bay is worthless to me if I can't cut it.
Track lighting
[ 1 Answers ]
I am trying to put in track lighting at my apt. My apt voltage is 120V and the lighting has a dimmer switch. However the pendant that I am trying to install says that if dimming is required use only an electronic low voltage transformer dimmer such as Commercial Electric SKU#731-638. My...
Track lighting not working
[ 5 Answers ]
I have a Hampton Bay 7 light track light kit. Each of the 7 light fixtures on the track have a halogen 20W bulb in them. Recently, the power in my house went off for about 10 minutes. This happened at night, so all of the lights/ switches were off. After the power came back on, I noticed that...
Old Track Lighting
[ 2 Answers ]
I apparently have an old Murray Feiss track lighting system (3 lights w/reflector bulbs). I was hoping to find a compatible track head, but have been told that there are none. The heads in place now are big and bulky and ugly and would like to replace them. Would it just be easier to replace the...
Track Lighting
[ 2 Answers ]
I would like to install track lighting on the top of our kitchen cabinets to illuminate the ceiling. It appears this would be an "upside-down" installation. Safety and stability are my prime concerns. Can this be done safely ? Are there specific brands which are more suitable to this... View more questions Search
|