 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Laundry stand pipe - #2
I already ask a question and would like to thank Milo Dolezal,massplumber2008 for their answers. And would like to get their opinions on this setup.
  101_0009[1] on Flickr - Photo Sharing! 3338006355_141b911fc0 on Flickr - Photo Sharing! Thanks Jim |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello I'm doing a remodel of my laundry room, I would like to lose the utility sink and the washer line that drains into it. I would like to go with a sink that is mounted in a counter. I don't think I can put in a laundry stand pipe because the drain pipe is 1.5 inch. Do you need 2...
Yesterday I had a repairman come round to have a look at my washing/drying-machine because the last time it was used it filled up with water and was unable to drain. He had a look at it expecting a blockage, and 'unplugged' the pipe leading into the standpipe, and upon doing this it was able to...
I've had to route my washer drain out of my septic system (drain fields are bad). In the house crawl space the washer pipe 2" pvc came through the floor one bend (elbow) and 3' of travel to the septic cast iron pipe down to the septic tank. I cut into the pvc just past the elbow (maybe 2' past)...
I have searched this board looking for an answer and the main solution is to snake the drain which I have done all the way to the main. Here is the situation. Washer sits on exterior wall 7ft from main line there is a 1 1/2" stand pipe 3 ft long that sticks out above the washer by 3 inches it 90...
View more questions Search
|
