 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling Fan Remotes & Wiring
Two questions...
Is direct line of site to the receiver required for a remote, or does it work with radio waves? If I want to control the light from a wall switch in addition to controlling the same light (and the fan) from a wireless remote, is there a way to wire it so that if the power is turned off from the wall switch, I can still turn on the light from the remote? |
||||
|
||||
|
1. Most remotes are radio-frequency
2. The only way to do so, if I understand you correctly, is to get a matching wall switch with radio-frequency control. http://www.ceiling-fans-n-more.com/c...e-controls.php |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Changing a existing fan with 2 switches one for light and one for fan. Ceiling wires are black, red ,white ,ground. New fan has black,white,ground.not sure how to wire it up.:confused:
I bought a new ceiling fan to replace an existing one. (the existing one worked, I just didn't like the way it looked). There's only 2 wires from the ceiling. The new ceiling fan has four wires: green, black, white, and one combo black/white. The light works as long as I connect the combo...
We are remodeling our bathroom and have installed a ceiling fan. We removed a double outlet socket and are replacing it with a combination switch/socket device. Outlet and switch. The incoming wires are the following: 1. Black, white, and ground from the fan. 2. Black, white, red, and ground...
I have a ceiling fan, I think it’s make by Hunter. We had some ceiling painting done and the painters broke the fan reversing switch pull chain, and then they made matters worse by removing the switch without marking the wires. This fan's reverse switch has a pull chain, the first pull turns...
My new Hampton Bay Ceiling Fan w/lights says to connect the blue and black wires to the black wire and the white to the white. However, my ceiling junction box just has two white wires. I tried connecting the blue and black wires to one white wire and the white wire to the other white wire. The...
View more questions Search
|
