Ask Experts Questions for FREE Help !
Ask
    integrityhealth's Avatar
    integrityhealth Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 28, 2009, 01:30 PM
    Plumbing my shop
    What size line do I run from pump house to shop and from shop to garden faucet?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 28, 2009, 05:27 PM
    Hi integrity:

    Hmmm... need more info. Here.. ok? Let us know what fixtures will be in the shop. Are you installing drains and vents or just water?

    Let us know

    MARK
    integrityhealth's Avatar
    integrityhealth Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Mar 4, 2009, 10:31 AM
    Will have utility sink with cold water only and greywater drain line or some kind of outdoor pit. Will also run pipe for faucet to outside wall of shop and line to remote faucet in garden area.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Mar 4, 2009, 11:03 AM
    I would run a 3/4" copper pipe and then send a 1/2" pipe to each fixture.

    Branch off the 3/4 with 1/2" to utility sink, then 3/4" over to the outside wall faucet where you branch off with 1/2", and then reduce to 1/2" to run 1/2" to the remote garden faucet.

    That should do it for you... ;)

    MARK
    integrityhealth's Avatar
    integrityhealth Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Mar 6, 2009, 10:21 AM

    Thanks Mark, very helpful.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fruit and veg shop [ 4 Answers ]

Would owning a fruit n veg shop provide a good earning. I know it would depend on area etc, but its been something I've been thinking about recently. Does anybody run or own a fruit shop? Thanks for your time guys.

Opening a shop [ 5 Answers ]

Information to open a shop

Mower in the shop [ 1 Answers ]

I had same prob and found this answer on other site, mines in shop now and they said valves doing this are common, hope it helps "If the valves aren't adjusted just so... won't work. Too much compression for the starter to overcome - try takin spark plug out and it it cranks over better it...

Shop Vac [ 1 Answers ]

I broke the plastic, white filter nut on my shop vac. Can I fix this or will I need to buy a new shop vac? Thanks, Christine:cool:

View more questions Search