Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Vac pumps
[ 5 Answers ]
Just wondering how long do you leave the pump on the condencer? For 1.5 and 2 T I usually leave the pump on for about 20 to 30 min. Yesterday and today I installed 3 - 5 tonns and 3-4 tonnes at a new building . Tomorrow I'll vac them out for about 30 min each. If you don't mind me asking, what's...
24 Volt connection on central vac
[ 1 Answers ]
I just got a brand-new Hoover central vac as a wedding present and I'm trying to connect it. The instructions are VERY vague they simply say to connect the 24 volt power in the proper space. Easier said than done... I have the rough in from my contractor and the wire looks like a phone line. It has...
24 VAC to thermostat
[ 1 Answers ]
I've got a new thermostat that needs 24VAC to run. I've seen a few Q&A's on this, I have one specific question. OK, I removed the plate on my furnace that exposes all the electrical connections, and there's the YWGR terminals, with the appropriate colored wires attached, then there's a "C"...
46 VAC pre-wire for ceiling fan
[ 3 Answers ]
I just moved into a new home that the builder said was pre-wired for ceiling fans. I bought the first fan and light combination, but when I popped the ceiling junction box cover off and measured AC voltage between red and white or red and copper with the switch on, I only found 46 VAC. I measured...
Trying to replace a 24 vac transformer
[ 3 Answers ]
Hi Everyone, I need instructions on how to wire the junction box where the 120 vac power, the fan limit, and the blower motor wires all come together. I undid all the wires and got confused on how to put it back together. Here are the facts: 25 year old Rheem gas hot air upright furnace. Three... View more questions Search
|